Centaur HTP Kleerflex Doors
For use anywhere you want to control temperature, dust and noise, even for applications like stall doors. KleerFlex gives great flexibility with hands-free operation. Superior clarity, tightly sealed, non-stick, for indoor/outdoor applications withstanding temperatures from -10ºF to 150ºF. Will not discolour in sunlight. Keeps birds, insects and dust out. Features easy to install MaxBullet hardware system, available in standard or heavy duty aluminum. This hardware system features a unique bullet-shaped locking feature for easy snap-on/snap-off strip replacement. Once the hardware is attached to a door frame, no tools are required to attach strips. 6061 Alloy Aluminum. 1-year guarantee included.
Call for Pricing.
|Item#||Kit Size||Strip Width||Strip Guage||Overlap||Weight|
The EQUUS Stall System consists of a selection of horse stall components. EQUUS Stalls combine the strength and flexibility required for a safe, yet easily assembled, stall system. Rugged, heavy gauge, and galvanized steel components guard against rust and corrosion, while helping to stop the problem of cribbing, chewing and splintering. All wood corners are covered with steel U-channel leaving only flat wood surfaces exposed. Custom design of any stall is easy with EQUUS. Combine individual components to build the stall you want in the space allotted.
Model 4000 Grill Sections.
Galvanized 7/8″ pipes, spaced on 4″ centers, allow openings of 1 1/8″. Galvanized U-channel top and bottom rails fit over standard 1 1/2″ lumber. Rubber bushings installed on channel eliminate rattling of bars. Height is 32 3/4″. Lengths available are 24″ or 48″ and can easily be field cut to any size required.
Model 4501 End Channels.
Constructed of 16 gauge galvanized steel for 1 1/2″ standard lumber, complete with fasteners for installation of front, back, and intermediate stall walls with or without grills. Fast installation and easy removal as necessary. Length 48″.
Header Channel #4502
Designed to hold header board in place above grill section(s), come complete with fasterners. 7″ Length.
Wall Brace #4503
Join wall boards together for extra strength. Heavy 16 gauge steel formed to prevent sharp edges. Complete with fasteners. Size: 48″
Feeder Door #4250
Fits in standard grill section and swings right or left. Constructed of 18 gauge galvanized steel with spring loaded latch. Size overall is 31 3/4″ x 15 1/4″
|4250||Feeder Door||31 3/4″x15 1/4″||$64.50|
Sliding Door Kit
This sliding door kit consists of the sliding door frame (vertical and horizontal u-channels), single 48″ grill section and reinforcement channels, all pre-punched for installation of fasteners which are included. Top rail is prepunched ready to accept drop bolt trolleys. Door is designed to use one sheet of 3/4″ plywood cut in half for bottom section or you may use standard lumber 1 1/2″ thick. Use of plywood is recommended to avoid warpage and twisting.
Slide Door Kit Includes: 2- Vertical U-Channels 16 Ga. • 2- Vertical Reinforcement Channels • Top and Bottom Horizontal Channels • Grill Assembly Pipes and U-channels • All Fasteners Required
Needed to Complete Door: 1 Piece 4’x8′-3/4″ Plywood • 1 piece 2″x6″-4′ or 10 pieces 2″x6″-4′ Lumber Track Hardware Package
MWI Round Track Hardware Package
National Track Hardware Package
|1 piece||8′ Round Door Track||$23.60||1 piece||8′ Sliding Door Track||$21.20|
|4 each||Plain Track Hangers||$5.80||5 each||#51-F Track Bracket||$23.00|
|1 pair||9 1/2″ Drop Bolt Trolleys||$35.90||1 pair||9 1/2″ Drop Bolt Trolleys||$35.90|
|1 each||#18 Stay Roller||$8.10||1 each||#18 Stay Roller||$7.70|
|1 each||#17 Door Bumper||$5.50||1 each||#17 Door Bumper||$5.30|
|1 each||#V-1134 Door Latch||$15.20||1 each||#13-B Door Latch||$9.40|